6.5mm 130gr Round Nose- This little gem is a great shooter. Good for 6.5TCU, 6.5JDJ, 6.5x55  Mauser, 6.5 Bulberry ETC. Good to Great accuracy has been reported. This mold is an N.E.I design.

7mm 150gr Silhouette- This is by far is one of the best selling bullets I have. It is a RCBS design cut into Magma mold blocks. This long range silhouette bullet is great in 7TCU, 7BR, 7US,7x30,7 Mauser.   Groups of 3" and under have been reported at 150 - 200 yards and it is more than capable of taking those pesky rams and shootoff's at 200 yards. Velocity recommendations are 1800-2000FPS.

30 Cal 149gr FN - This is also a Saeco Mold . Very accurate  Easy to load for and is a nice all around bullet. Great Accuracy is possible and the Flat nose area makes for good energy transfer and safe loading in some lever action guns.

30 Cal 175gr PTD- This is also a RCBS. Mold.  Superb accuracy has been reported. This is a top seller with the Silhouette crowd. This is a good weight for shooting all the steel animals without the hassle of different bullet weight changes down the line. This is the new style RCBS mold with the wider flatter nose.

30 Cal 180 gr FN-   Many shooters are using this heavyweight for the Cowboy Action Game!

Its flat nose is ideal for those lever action guns with tubular magazines!!! Its is also very accurate in those bolt action 30 Calibers when loading 2000fps and under with a nice slow powder such as XMP5744!!!

30 Cal 210gr  PTD- This is the ultimate long range 30 cal! Many shooters are using this heavyweight for the 500 yard shoots.More than one customer has reported groups of 5" and under at 500 yards. This bullet is also a favorite of the 300 Whisper crowd for Silhouettes.

357 168gr Keith- You asked for it here it is the original "Elmer Keith design"

This classic bullet design is the standard which started it all. Put some 2400, AA#9 or Lil Gun behind this little gem and go have fun! Accurate, good for small game and paper targets as well as steel silhouettes!

357 205gr Silhouette- This is a Leadhead Original designed by Marty Flack and is very similar to the RCBS although I have found it to be a LOT more accurate. It is one of our top sellers and is accurate and easy to load for.   This bullet is extremely accurate in the 357, 357max, Wesson "360"  35 Remington, 35 Whelen etc.The crimp groove is moved towards the nose so that most 357 revolvers can use it. In a case where OAL is too long use 38 Special cases.This bullet was designed by Marty with the cherry being made by Walt from N.E.I.

41-220  Keith You asked for it here it is the original "Elmer Keith design"

This classic bullet design is the standard which started it all. Put some 2400, AA#9 or Lil Gun behind this little gem and go have fun! Accurate, good for small game/ Deer sized game and paper targets, as well as steel silhouettes! This bullet will make your 41 sing!

41- 235FN This Is a smaller version of our 41 270 grain bullet It has a good frontal area ,is very accurate and is a favorite of Silhouette Shooters and Hunters. A good dose of the right powder and this will take even the most stubborn rams and is also great for hunting!! This is our second most popular 41 bullet.This bullet is accurate and when used with the right load will put you right up there with the 44 mag with less recoil. Cherry for this bullet was made by Walt at N.E.I

41- 270FN This Is a Leadhead Original designed by Marty Flack It has a wide frontal area is very accurate and is a favorite of Silhouette Shooters and Hunters. A good dose of the right powder and this will take even the most stubborn rams!! This is our top selling 41 bullet.This bullet is accurate and when used with the right load will put you right up there with the 44 mag . Recoil with this bullet and top loads is stout but manageable. Cherry for this bullet was made by Walt at N.E.I

You asked for it here it is the original "Elmer Keith design"

This classic bullet design is the standard which started it all. Put Elmers Classic 2400 load behind this bullet, AA#9 or Lil Gun and go have fun! Accurate, good for small game/ Deer sized game and paper targets, as well as steel silhouettes! Very Accurate!

.44 265gr-FN- This Is a SAECO mold. It has a wide frontal area is very accurate and is a favorite of Silhouette Shooters and Hunters. A good dose of AA # 9 and this will take even the most stubborn rams!! This is our top selling 44 bullet.

.45 310 gr-FN- You asked for it we added it! This Is an LBT Design  It has a wide frontal area is very accurate and is a favorite of Silhouette Shooters and Hunters. A good dose of AA # 9 and this will take even the most stubborn rams!! This is one of our our top selling  Plainbase 45 bullets.

  45/70 405 gr. FN- This bullet is a great shooter in the 45/70. Great for long range shooting, hunting and plain old paper punching. Good accuracy has been reported. Can also be used for BPC. Our tests have shown that this multiple lube groove design out shoots the single lube groove design that the other companies offer!